The 120 SERIES electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angle, and proven reliability. The actuators can operate directly on 12, 24, or 32-volt battery supplies.
The 120 SERIES electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angle, and proven reliability. The actuators can operate directly on 12, 24, or 32-volt battery supplies.
Features
- Rotary output linear torque proportional servo
- Small, low cost, low friction model
- 1.0 lb-ft of torque
- Suitable for rotary or small inline fuel pumps of small carburetors
- Ideal for fuel systems on engines up to 150 HP
SPECIFICATIONS
PERFORMANCE
Available Torque
1.0 ft-lb max (1.4 Nm) See Diagram 5
Max Operating Shaft Travel
25° ±1° CW/CCW
POWER INPUT
Operating Voltage
12 or 24 VDC
Normal Operating Current
2.0 Amps @ 12 VDC
1.0 Amps @ 24 VDC
Maximum Current
Continuously Rated
6.0 Amps @ 12 VDC
3.0 Amps @ 24 VDC
ENVIRONMENT
Operating Temperature Range
-65°F to +200°F (-54°C to +95°C)
Relative Humidity
up to 100%
All Surface Finishes
Fungus Proof and Corrosion Resistant
PHYSICAL
Weight
4.5 lb (2.05 kg)
Mounting
The electrical connector at top preferred
RELIABILITY
Vibration
Up to 20 G, 50 – 500 Hz
Testing
100% Teste
