SmartGen HAT560NBC ATS controller PC Two-stage PC Three-stage CB and CC switch
          
by SmartGen
          
        
      
      
        
      
      
      
      
        $135.00
      
    
  
            SKU HAT560NB(C)
          
        
      
    - 1. System type can set as: Mains (1#) & Generator (2#), Generator (1#) & Mains (2#), Mains (1#) & Mains (2#), Generator (1#) & Generator (2#).
 - 2. 132x64 LCD with backlight, optional Chinese and English display, push-button operation.
 - 3. Measure and display 2-way 3 phase Voltage and Frequency:
 - 4. Over/under voltage, loss of phase, reverse phase sequence, over/under frequency protection.
 - 5. Automatic/Manual mode. In manual mode, can force the switch to close or open;
 - 6. All parameters can be set on site. Two different passwords which ensure authorized staff operation only.
 - 7. During commissioning, the genset can be set either on On-load or Off-load mode.
 - 8. ATS Controller has the function of automatic Re-closing.
 - 9. The closing output signal can be set as on intervals or as continuous output.
 - 10. Applicable for ATS of one neutral position, two neutral positions and non-position.
 - 11. Applicable for 2 isolated neutral lines.
 - 12. Real-time clock (RTC).
 - 13. The event log can record 50 items circularly.
 - 14. Scheduled start & stop generator (can be set as start genset once a day/week/month whether with load or not).
 - 15. Can control two generators to work in a cycle, even the genset running time and crank rest time can be set.
 - 16. Optional AC system or DC system.
 - 17. With standard LINK communication interface. With "remote controlling, remote measuring, remote communication" function by the Modbus communication protocol. Can remote start/stop the genset and remote control the ATS to close or open?
 - 18. With RS485 isolated communication interface. With "remote controlling, remote measuring, remote communication" function by the ModBus communication protocol; or remote measuring the status of incoming cabinet and remote controlling the ATS to close/open by the front-end intelligent device (YD/T 1363.3-2005) protocol.
 - 19. Can check the current status of the controller (digital input port, a digital output port, over-voltage, under-voltage, over frequency, under frequency, etc.).
 - 20. Suitable for various AC systems (3 phase 4-wires, 3-phase 3-wires, single-phase 2-wire, and 2-phase 3-wire).
 - 22. Modular design, self-extinguishing ABS plastic shell, pluggable terminal, built-in mounting,compact structure with easy installation.