GAC ADC-225GS-12 Universal Actuators 225 Series - 2.2 Lb. Ft. Torque / 25¡ã Rotation
12 or 24 VDC / Commercial Connector with Mating Harness / Lesser Rate Return Spring
The 225 Series electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12 and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units, thus it provides a more stable and rapid response to transient conditions. Applications include fuel injection pumps, with or without mechanical governors, rotary type pumps, and medium-sized gaseous fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines.
Features:
- Easy Installation
- Universal Design
- Internal Return Spring
- Rapid Response to Transient
- Multiple Mounting Positions
- 2.2 lb.ft. Torque
- 25° Rotation
SPECIFICATIONS
PERFORMANCE
Available Torque (w/o Return Spring)
2.2 ft-lb max (2.7 Nm)
Maximum Operating Shaft Travel
25° ±1° CW/CCW
POWER INPUT
Operating Voltage
12 or 24 VDC
Normal Operating Current
3.0 Amps @ 12 VDC
1.5 Amps @ 24 VDC
Maximum Current
Continuously Rated
8.0 Amps @ 12 VDC
4.0 Amps @ 24 VDC
ENVIRONMENT
Operating Temperature Range
-65°F to +200°F (-54°C to +95°C)
Relative Humidity
up to 100%
All Surface Finishes
Fungus Proof and Corrosion Resistant
PHYSICAL
Weight
8.25 lb (3.75 kg)
Mounting
Any Position, electrical connector at the top preferred
RELIABILITY
Vibration
Up to 20 G, 50 – 500 Hz
Testing
100% Tested
