Permanent Magnet Motor Speed Controller For CURTIS 1212P-2501 24V/90A Forklift

Notice: For the buyer without CONTROLLER APPLYING EXPERIENCE, please consult your cart/motor dealer and read carefully the CURTIS 1212&1212P Controller Manual before making the purchase.
Key Features:
CURTIS Model: 1212P-2501
Norminal Battery Voltage (Volts): 24V
10 Second Current Rating (amps): 90
2 Minute Current Rating (amps): 50
1 Hour Current Rating (amps): 20
Peak Boost Current (amps): 90
Max Boost Current Duration: 10 Second
Minimum motor resistance: 120 mΩ
B+, B- logic pin current (max.): 9 A (pins 7 and 13 on 14-pin connector)
KSI input current (typical): 80 mA
Logic input current (typical): 1 mA
Horn output current (max.): 15 mA
BDI output voltage, resistance (max.): 0–5 V, 10 kΩ
LED output current (max.): 15 mA
Electromagnetic brake coil resistance (min.): 32 Ω
PWM operating frequency: 15.6 kHz
Electrical isolation to heatsink (min.): 500 VAC
Undervoltage cutoff: 14 V
Overvoltage cutoff: 34 V

Throttle Type: By default, the Throttle Type of controller 1212P-2501 is set as Type 7 (7 = single-ended; neutral when wiper ≤ PotLow). The 1212P-2501 controller can accept inputs from both 5kΩ, 3-wire pot throttles and voltage throttles. Set the throttle type parameter to match the throttle used in your application.

5kΩ, 3-wire pot throttles:
0 = wigwag
1 = inverted wigwag
2 = single-ended; neutral when wiper at PotLow
3 = inverted single-ended; neutral when wiper at PotHigh
4 = unipolar

Voltage throttles
5 = wigwag
6 = inverted wigwag
7 = single-ended; neutral when wiper ≤ PotLow
8 = inverted single-ended voltage; neutral when wiper ≥ PotHigh
9 = unipolar
Regulatory compliance: Designed to meet EN 12184, EN 55022, IEC 61000-6-2 & -4-6, and ISO 7176; FDA documentation filed; TüV Certification pending