SmartGen ATS Generator Control Module HAT150 ATS Generator Controller

PERFORMANCE AND CHARACTERISTICS

HAT150 controller can detect 2-way 3-phase/single-phase voltage (2-way mains and 2-way gens or 1-way mains and 1-way gens) and control ATS.

1. Can achieve PC programming control, voltage abnormal delay, Genset stop delay, voltage calibration and so on which all operated on a graphic interface. During computer programming, the base plate of the controller must be opened, and then use SG72 interface module (USB to LINK) to program via testing software of PC;
2. Normal delay of #I power or #II power can be set. Start delay of Genset can be set;
3. Abnormal delay of #I power or #II power can be set. Stop delay of Genset can be set;
4. “#I Priority”, “Manual”, “Mutual Backup”, “#II Priority” can be set through panel knobs. Ensure “#I Power Priority”, “#II Power Priority” or “No Priority” and maintenance;
5. Isolated design of 2-way Neutral;
6. The closing time of the switch is 5 seconds. If detecting the closing signal during this period, disconnect at once;
7. With re-closing function. This can make open/close breaker enabled even when the positions of operating mechanism and switch are inconsistent.
8. When 2-way power and volts are abnormal at the same time, if the voltage of A phase is normal, ATS will automatically transfer to Breaking (Middle) Position;
9. With a fire reset interface. When the input port is enabled, ATS will automatically transfer to Breaking (OFF) Position;
10. LED can display working modes of the switch clearly;
11. Strong anti-electromagnetic interference ability, can be used under a complex electromagnetic interference environment;
12. Modular configuration design, flame-resisting ABS plastic shell, inserted type terminals connection with compact structure and easy installation.